Close-up of powder-coated aluminum lighting channel and sealed RGB LED module on an Escalon, CA fascia board
    Sealed RGB module seated in powder-coated channel — specified for almond dust and valley fog.

    Permanent Christmas lights for a two-story house in Escalon, CA

    If permanent Christmas lights for a two-story house in Escalon has been hard to priced figure, it is since nearly all companies quote per house. Exterior Prime quotes per foot: 261 lit feet on a Melrose Park elevation is $7,830, laser-verified on site. Orchard dust lifting off the almond ground east of town sets the hardware list in Melrose Park.

    Escalon, CA 95320 · Reviewed September 2026

    The estimate sheet

    In Escalon, permanent Christmas lights for a two-story house is billed at $30 per linear foot of roofline actually lit, so a laser-measured 261-foot Melrose Park elevation totals $7,830 installed — powder-coated alloy track, sealed RGB modules, low-voltage transformer, mobile app controller and labour included. Standalone Exterior Prime visits in Escalon start at $297 near Yosemite Avenue.

    Line-item estimate sheet for permanent Christmas lights for a two-story house in Escalon, CA at $30 per linear foot
    LineQuantityAmount
    Line 1 — quantityWalk the Melrose Park fascia you want lit, total the straight runs, and 261 feet is a common Escalon answer.261 lit feet—
    Line 2 — rateNo second multiplier exists, so 261 feet becomes $7,830 exactly.per lit foot$30
    Line 3 — amountThe reading is re-taken on site near Yosemite Avenue, in Melrose Park, and locked into the written scope.261 × $30$7,830
    Line 4 — what is not on the sheetNo water or power charge, and no fee for hauling old holiday clips away in Melrose Park.—$0

    Permanent lighting in Escalon is $30 per linear foot of roofline actually lit, laser-measured on site and fixed in writing before any material is ordered. That rate carries the powder-coated aluminum channel, the sealed RGB modules, the low-voltage transformer, the app controller and the installation labor. Standalone Exterior Prime visits in Escalon start at $297.

    Pick a scope: what each Escalon tier costs at $30 a foot in Melrose Park

    • Entry only

      42 linear feet lit at $30/ft

      $1,260

      Porch and entry fascia board alone — the smallest scope worth doing on a Melrose Park house, and it still calls for the $297 standalone minimum met.

    • Front elevation

      232 linear feet lit at $30/ft

      $6,960

      The whole street-facing face, attached garage returns included, which is what nearly all Escalon households actually buy.

    • Front plus peaks

      263 linear feet lit at $30/ft

      $7,890

      Adds every gable and dormer above the eave line, the scope the $7,890 example on this page describes.

    • Front, peaks and side return

      290 linear feet lit at $30/ft

      $8,700

      Carries the lit run around the visible side, which matters on Escalon corner lots facing two streets in Melrose Park.

    What enters the quantity column in 95320 — and what never does in Melrose Park

    What enters the quantity column in 95320 — and what never does in Melrose Park — Escalon, CA laser measurement rules
    Run on the elevationOn the sheet?Why
    Windows, doors and trim SkippedNot part of a roofline quote at all, and no Escalon sheet will list them in Melrose Park.
    Gutter condition SkippedInspected and reported, but track mounts to fascia, in Melrose Park, and does not touch gutter pricing.
    Driveway and walkway length SkippedIrrelevant to this quote — only lit roofline fascia board enters the quantity column.
    Street-facing fascia CountedThe primary lit run, and on a Melrose Park elevation it is nearly all the 264 feet.
    Garage returns CountedShort but always read, since Escalon garages sit forward of the main face, in Melrose Park, and the eye follows them.
    Gable and dormer peaks CountedCounted as two angled legs plus a sealed transition, seven to eleven feet per peak in Melrose Park.

    From measurement to commissioning: how permanent Christmas lights for a two-story house runs in Escalon

    Approval is explicit at every point where money could shift near Yosemite Avenue — that is how it reads on a 261-foot Melrose Park roofline inside 95320.

    The sequence is fixed: measure, write, approve, order, installation, commission in Melrose Park. Rain days shift the site visit rather than compressing the site work. A 261-foot single-story Melrose Park elevation is a comfortable one-single day installation.

    The sequence is fixed: measure, write, approve, order, installation, commission on a 261-foot Escalon roofline. Rain days shift the site visit rather than compressing the site work. A 265-foot single-story Melrose Park elevation is a comfortable one-single day installation.

    Owning permanent Christmas lights for a two-story house in Escalon after the ladders leave

    Ownership after installation single day is a phone task, in Melrose Park, and an annual rinse.

    Ownership after installation single day is a phone task, in Melrose Park, and an annual rinse. Nothing in the system calls for a subscription to keep working near Yosemite Avenue. Photographs from the original 262-foot installation are what a warranty site visit starts from.

    Ownership after installation single day is a phone task, in Melrose Park, and an annual rinse. Nothing in the system calls for a subscription to keep working on a 261-foot Escalon roofline. Photographs from the original 266-foot installation are what a warranty site visit starts from.

    Reading an Escalon estimate sheet for permanent Christmas lights for a two-story house

    Material, mounting, wiring, the controller and the programming hour all live inside that single $7,890 amount.

    An Escalon estimate sheet for permanent Christmas lights for a two-story house has one billable line on it, and that line is lit footage. Schedules live in controller memory, so a dead router changes nothing roughly tonight's lighting near Yosemite Avenue. Consumption is roughly 0.4 watts a foot at full white, so 263 feet draws less than a bathroom fan.

    Sign the sheet and $8,010 is the last amount anybody says out loud roughly this job. Schedules live in controller memory, so a dead router changes nothing roughly tonight's lighting on a 261-foot Escalon roofline. Consumption is roughly 0.4 watts a foot at full white, so 267 feet draws less than a bathroom fan.

    Why lit footage is the only quantity on an Escalon permanent Christmas lights for a two-story house quote

    Owners overestimate their own rooflines routinely, then watch the laser return 264 feet — that is how it reads on a 261-foot Melrose Park roofline inside 95320.

    Owners overestimate their own rooflines routinely, then watch the laser return 264 feet. Corner transitions are included as track, since that is what they consume once fabricated in Melrose Park. Nothing roughly an Escalon quantity depends on the season you ask in near Yosemite Avenue.

    Owners overestimate their own rooflines routinely, then watch the laser return 268 feet. Corner transitions are included as track, since that is what they consume once fabricated near Yosemite Avenue. Nothing roughly an Escalon quantity depends on the season you ask in on a 261-foot Escalon roofline.

    What Escalon homeowners push back on, answered plainly in Melrose Park

    “"Is $7,830 negotiable?"”
    The rate is not, since it is published near Yosemite Avenue. Scope is: dropping the side return or leaving the rear dark removes real footage, on a $7,830 job, and real dollars from the sheet in front face of you.
    “"I'm worried roughly another mobile app on my phone."”
    Reasonable. Schedules live on the controller, so the mobile app is optional after commissioning — the house lights itself on an Escalon sunset programmed schedule whether or not anybody opens it in Melrose Park.
    “"My HOA or my spouse will veto the hue."”
    Sort that before the measurement. Everyday output is low warm white at low brightness, hue is a saved preset rather than a permanent state, and both are worth demonstrating before anybody signs a Melrose Park scope.
    “"We might sell in a couple of years."”
    Then say so at the measurement in Melrose Park. The value shows up in the listing rather than in your own use, and a shorter scope near Yosemite Avenue is typically the sensible version of this purchase in Melrose Park.

    An Escalon year with permanent Christmas lights for a two-story house, month by month

    1. May – July

      Late sunsets mean short lit run hours, and the mobile app programmed schedule follows them without anybody adjusting a timer.

    2. Any month

      Adding footage near Yosemite Avenue later joins the existing controller at the same $30, with no rework of the original lit run in Melrose Park.

    3. August – September

      Best window to measure in Escalon: harvest dust is manageable and a 263-foot installation still books comfortably before the holidays.

    4. October

      Scope signed and material ordered; orange, in Melrose Park, and purple scenes are typically the first ones programmed on a Melrose Park roofline.

    5. November

      The busiest month in 95320 — installs still happen, but dates go quickly and a late call may land in December on a 261-foot Escalon roofline.

    Permanent Christmas lights for a two-story house across Escalon and 95320

    • Almond and walnut ground around Escalon lifts fine dust onto eaves from bloom through harvest on a 261-foot Escalon roofline. Footage in Melrose Park typically measures shorter than homeowners expect, which lowers the 261-foot style amount rather than raising it.
    • Almond and walnut ground around Escalon lifts fine dust onto eaves from bloom through harvest on the 261-foot example priced above. Every Melrose Park job closes with photographs of each termination filed against the 262-foot address record.
    • Almond and walnut ground around Escalon lifts fine dust onto eaves from bloom through harvest on a $7,830 Melrose Park job. Every Melrose Park job closes with photographs of each termination filed against the 263-foot address record.
    • Almond and walnut ground around Escalon lifts fine dust onto eaves from bloom through harvest on the 261-foot Melrose Park example. Footage in Melrose Park typically measures shorter than homeowners expect, which lowers the 264-foot style amount rather than raising it.

    Escalon sits on our Highway 120 route — see the Exterior Prime service area, the pricing page for how lighting sits beside our washing packages, and the permanent lighting FAQ.

    Serving Escalon 95320 — Brentwood Estates, Melrose Park, Reed Manor, Rocha Estates, Silverwood, Vintage Estates

    Permanent Christmas Lights in Escalon — questions homeowners ask

    A 261-foot Melrose Park roofline is $7,830 installed at the published $30 per lit foot, and that amount is fixed in writing after the on-site measurement. On a 261-foot Escalon roofline that is the ordinary outcome rather than the exception. A 261-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: How much is permanent Christmas lights for a two-story house on an Escalon house?

    No. The measurement produces a written scope at $30 per lit foot before material is ordered, and additions afterwards carry their own written amount and your approval in Melrose Park. On a 262-foot Escalon roofline that is the ordinary outcome rather than the exception. A 262-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: Can the $7,860 amount shift after measurement?

    Screwed into framing behind the fascia, with every penetration sealed as it is driven near Yosemite Avenue. Adhesive lets go at the 130°F fascia board temperatures an Escalon July produces in Melrose Park. On a 263-foot Escalon roofline that is the ordinary outcome rather than the exception. A 263-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: Is the track screwed on or glued on near Yosemite Avenue?

    A material deposit follows signature on the written scope, with the balance due after commissioning near Yosemite Avenue. Nothing is ordered before the 264-foot quantity is confirmed on your driveway. On a 264-foot Escalon roofline that is the ordinary outcome rather than the exception. A 264-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: Is a deposit required on a $7,920 job?

    Because footage is the only honest variable near Yosemite Avenue. Two Melrose Park homes on one street can differ by fifty feet of fascia board, and a per-house priced figure overcharges the smaller one. On a 265-foot Escalon roofline that is the ordinary outcome rather than the exception. A 265-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: Why quote per foot instead of per house in Escalon?

    Yes. Schedules and scenes live on the controller, so an outage near Yosemite Avenue affects only your ability to shift things from the mobile app. On a 266-foot Escalon roofline that is the ordinary outcome rather than the exception. A 266-foot measurement in Escalon takes roughly fifteen minutes to verify.

    Copy link to this answer: Does it still site work when the internet drops in Melrose Park?

    Book Now (209) 821-1212

    Still have a question about your Escalon property? Call and a trained Exterior Prime professional will walk you through it.

    Send your Escalon roofline details and we reply with a measured plan.

    Request a measured lighting quote

    Send the details and we'll email a written Escalon quote at $30 per linear foot of roofline lit.

    Ready to get started?

    Book Your Premium Wash Today

    Fast scheduling. Photo-verified results. Clear pricing from the start.