Permanent Holiday Lighting Installation Near Me — Manteca, CA

    From the measure visit to the moment the app lights your Manteca roofline for the first time, the whole installation is a short, well-defined process — usually a single day, entirely handled from our side.

    Manteca, CA 95336 · 95337 · Reviewed September 2026

    Exterior Prime professional laser-measuring the front roofline of a Manteca home to build a permanent lighting estimate

    Short answer

    Permanent holiday lighting installation near Manteca runs $30 per linear foot and follows four steps: laser measurement, written layout approval, one-day mounting and wiring, then app commissioning. Most Manteca single-story homes are finished the same day our professionals arrive, typically within four to six hours.

    Specification sheet

    Step 1
    Laser measure and marked elevation photo
    Step 2
    Written layout and price approval
    Step 3
    Channel, modules, wiring and transformer installed
    Step 4
    App pairing, scene setup and walkthrough

    What it costs: $30 per linear foot

    Installation labor is not billed hourly; it is folded into the measured per-foot rate you approve up front.

    Permanent lighting cost examples for Manteca homes at $30 per linear foot
    Roofline scopeLinear feetInstalled price
    One-day single-storyComplete in a single visit.115 ft$3,450
    Long ranch elevationStill typically one day.155 ft$4,650
    Two-day two-storyPeaks completed on day two.210 ft$6,300

    Permanent lighting is $30 per linear foot of roofline actually lit, measured on site and confirmed in writing before any material is ordered. The figure covers the channel, the sealed RGB modules, the low-voltage transformer, the controller and the labor to install them.

    The installation day itself

    Our professionals stage on the driveway, work one elevation at a time, and energize the run before packing up.

    Tarps go down first, the channel is cut and dry-fit along each elevation, then fastened and sealed roughly every 12 to 16 inches. Wiring is pulled last so the visible line is set before any low-voltage lead is committed. Nothing is left energized until all 2 sets of splice checks are complete.

    By the time our professionals leave your Manteca driveway, the app is on your phone, your scenes are saved, and the schedule is running.

    Exterior Prime professional laser-measuring the front roofline of a Manteca home to build a permanent lighting estimate
    Every estimate starts with a measured roofline, not a phone guess.

    What we need from you

    Access to one exterior outlet, a clear driveway, and twenty minutes at the end for the walkthrough.

    That is the whole homeowner obligation, and it amounts to about 30 minutes of your day on a job that takes our professionals 4 to 6 hours. You do not need to be home for the mounting work, but the walkthrough at the end is worth being present for — it is where scenes get named the way your family actually talks about them.

    The walkthrough itself runs about 15 to 20 minutes, long enough to save 4 or 5 named scenes and confirm the sunset schedule before our professionals pull out of the driveway.

    Exterior Prime professional fastening a black aluminum LED channel under the front eave of a single-story Manteca home
    Channel track being fastened to the fascia of a Manteca ranch home during installation.

    How install days are scheduled around Manteca

    Manteca jobs are grouped by neighborhood so one visit to Union Ranch or Woodward Park covers two or three homes on the same morning.

    Batching addresses this way keeps arrival windows tight — usually a two-hour range instead of an all-day wait — because the transformer, channel stock and lift equipment needed for a stucco two-story in Del Webb at Woodbridge are already loaded before the truck leaves the yard. It also means a 95336 install and a 95337 install can happen back to back without a return trip across town.

    During September and October, when the pre-holiday queue is lightest, a Manteca homeowner can often get a measure visit and an install date within the same two-week window. From November onward the same request typically pushes three to four weeks out.

    Homeowner using a phone app to change the color of permanent holiday lights on a Manteca house at night
    Scenes, schedules and brightness are set from the phone app, not from a ladder.

    Timing notes for Manteca installs

    • Summer installs start early to keep our professionals off tile during peak afternoon heat.
    • Winter fog can push lift work later in the morning until surfaces dry.
    • Manteca install days are grouped by neighborhood so arrival windows stay tight.

    Manteca sits inside our core coverage — see the full Exterior Prime service area for neighbouring cities, and the pricing page for how permanent lighting sits alongside our washing packages.

    Serving Manteca 95336 · 95337 — Union Ranch, Woodward Park, Del Webb at Woodbridge, Powers Tract, Mayors Park, Downtown Manteca

    What you get

    • Most homes finished in one visit

    • Layout approved in writing before installation begins

    • App configured and explained before our professionals leave

    Permanent Holiday Lighting Installation in Manteca — questions we get asked

    Yes, both Manteca ZIP codes are on the standard installation route, and jobs are often batched by neighborhood so a 95336 install and a 95337 install happen on the same day. The $30-per-foot rate does not change based on which ZIP the home falls in.

    Copy link to this answer: Do you install permanent holiday lighting in ZIP 95336 and 95337?

    Book the measure visit by early October if you want an install completed before Thanksgiving. Requests placed in November still get scheduled, but the queue lengthens and installation may not happen until December, closer to the display's intended start date.

    Copy link to this answer: How far in advance should I schedule installation before Christmas?

    Only at the end. Mounting and wiring need driveway access and one exterior outlet, not a homeowner standing by, but the final walkthrough works best in person so your scenes get set the way you want them.

    Copy link to this answer: Do I need to be home for the installation?

    No. The system runs on low voltage from a transformer that plugs into an existing exterior outlet. If your Manteca home has no usable outlet on that elevation, we will say so during the measure visit rather than after.

    Copy link to this answer: Is an electrician required?

    We reschedule rather than seal fasteners into wet fascia. Sealant needs a dry substrate to bond, and a rushed install in Central Valley winter weather is exactly the shortcut that causes callbacks two years later.

    Copy link to this answer: What if it rains on my install day?

    Typically one to three weeks outside the holiday season, once material arrives for your measured footage. From late October the queue lengthens noticeably, which is the argument for measuring early.

    Copy link to this answer: How soon after the estimate can installation happen?

    Two our professionals handle most single-story Manteca jobs, and a third joins for two-story elevations that need lift work on 2 or more gable peaks, which keeps the average install day under 6 hours even on larger homes.

    Copy link to this answer: How many people from Exterior Prime show up for a standard installation near Manteca?

    Book Now (209) 821-1212

    Still have a question about your Manteca property? Call and a trained Exterior Prime professional will walk you through it.

    Request a measured lighting quote

    Send the details and we'll email a written Manteca quote at $30 per linear foot of roofline lit.

    Ready to get started?

    Book Your Premium Wash Today

    Fast scheduling. Photo-verified results. Clear pricing from the start.